MICRO DNC . USB Reader Kit fo CNC MACHINE. DNC USB

Description

The MICRO DNC is used to send and receive CNC program files between
a CNC control and a USB memory stick. The
MICRO DNC
connects to the CNC
control via RS232 port. It can also ‘drip feed’ the CNC control - providing that the CNC
control is capable of receiving and executing a G code program via its RS232 port.
NOTICE
. This is the version without WIFI / LAN connection function.
If you are interested in the "WIFI CONNECTION" function, you can access our store
https://www.ebay.com/str/DNC-CNC?_trksid=p2047675.l2563
or link below.
https://www.ebay.com/itm/DNC-WIFI-DNC-FOR-CNC-MACHINE/303512730883?hash=item46aac4bd03:g:XzsAAOSwPJVdTu9j
transfer program into CNC machine memory
transmit DNC drip program (works in TAPE mode)
receive program or PC / PARAMETER from CNC machine
with 2-4GB internal memory, USB reader support with large capacity
has RS232 DP9 communication port
There are 3 rear mounted magnets of the device that make it easy to put DNC on CNC machines
PACKAGE INCLUDES 1DNC + 1 CABLE + 1 ADAPTER
NOTE:
You can power the MICRO DNC via CABLE RS232, PIN 25 = 24V .
If on the 25 pin of RS232 on the CNC machine with power(24VDC) you can not use 12vdc adapter