DNC TITAN, RS232 To USB Reader, Drip Feeder Device

Description

FACTORY DIRECT
This is the newest model - CNC DNC transfer system.
Poweful - Simple - Easy to use
Video on YOUTUBE -
Click here to view
From August 01st, we increase the internal memory up to 16GB.
This is a Portable Program Transfer Device that transfers CNC machine programs from a standard USB flash drive (Thumb Drive, Pen Drive, memory stick…) to or from the CNC control through the RS232 communications port, also referred to as Drip feed DNC or Up-Loading & Down-Loading. Extension of file name supports: *.?NC, *.TXT,*.NC, *tap
Design characteristics & Features
·
LCD 2.4 inch, 65536 colors : display program content, File & Folder list, vibrant and visualization
·
Internal MEMORY:
16GB
use to storage and manage NC programs
·
02 ports of USB 2.0
·
Protocol: RS232 & Parallel 50-pin for old Fanuc paper tape communication.
·
Power switch: ON/OFF
·
04 magnet nuts to mounting on CNC machine
·
06 Buttons: RESET, FUNCTION, BACK, SET, UP, DOWN
·
Function: COPY-PASTE, CUT-PASTE, RENAME, DELETE, Make NEW FOLDER: easy management files & folders on USB flash drive  and internal MEMORY.
·
Function AUTO CUTTING: it can cutting by Percent or Line Number. We can see program content after cutting.
·
Function SEND – Send program to CNC machine, monitoring program content when sending
·
Function FORCED SEND – Forced transfer a program to CNC machines without the required signal from CNC machines (Skip XON)
·
Function RECEIVE – Receive program / parameter from CNC machine.
·
USB/MEMORY capacity monitoring; Format USB flash drive, etc.
Applications:
Compatible with CNC machines currently uses operating systems such as: most of control of FANUC (FANUC 6M, FANUC 6T, FANUC 18, FANUC O, ect)  , Mitsubishi, Yasnac, Okuma, Mazak,Haas, ect
Replace computer running DNC software.