-40%
10mm Pellet Press (Steel Dry Pressing Die Set)
$ 137.28
- Description
- Size Guide
Description
Pellet Die set for making 10 mm (~5/8 inch) pellets from powders.Free fast shipping for USA and Canada
Video of how this fits together here
https://youtu.be/6IPhlwLYnvs
Die Set includes: Die sleeve, plunger rod, 2 x spacers, release ring and base plate.
10 mm (1 cm) Pellets can be used for the preparation of KBr pellet for FTIR as well as a large variety of other lab applications, with increasing application in biomedical and energy storage researchers. Whatever application you need this versatile size for - the superior surface finish on our 10 mm Pellet Press Die Set (as with all our pellet die sets) will make our die set the right choice for long lasting trouble free performance. If you don't have a hydraulic press around the lab, you can use manual arbor pressed to exert sufficient force for compaction on these dies.
Die made of hardened tool steel (Rockwell hardness >C60) for long lasting trouble free performance. Sleeve is polished to high tolerances to allow the hardened tool steel plunger to slide through perfectly.
Plunger and spacers are made from high yield strength steel, machined and polished to high tolerance for the perfect fit. Interior surfaces ground to mirror-like finish.
Custom orders: We also make custom sizes so get in touch if what you see if not listed here!
Yield Strength Hardened Steel
80,000 psi (550 MPa)
Recommended max loading @ 50 %
40,000 psi (275 MPa)
Recommended max force
4850 lb (2.4 ton, 22.6 kN)
Typical force for quality pellets
610-1825 lb (0.3-0.9 ton)
Die sleeve inner diameter
10 mm (0.39 inch)
Die sleeve height
50 mm (1.97 inch)
Die sleeve outer diameter
45 mm (1.77 inch)
Assembled height with spacers (w/o powder)*
100 mm (3.94 inch)
Assembled height no spacers (w/o powder)*
84 mm (3.31 inch)
*If making thicker pellets, the die set can operate just the same without spacers